SP-500 Seismic Sensor

The buried geophone detects seismic activity at the detector location and generates an electrical signal that is analyzed by the processor to determine if a specified type of intrusion has occurred. With a single seismic detector (SP-500), users can monitor a small area or trail. With multiple detectors (SP-500P) connected in a string, users can monitor large open areas or perimeters. For hard surfaces such as concrete and rocks, users can purchase the ground plane adapter (GP-505) instead of the ground spike. Intrusion detection range depends on several variables, such as: type of terrain, processor sensitivity setting, number/type of intruders, etc.

Telonics can sell this product only to law enforcement, military, and government agencies; these products are for use only within such agencies.

Specifications

Mechanical

Size L x Dia	5.25 x 1.25 in 134 x 32 mm
Weight	16 oz 453 g

Operational

Minimum operating temperature	-40° C
Maximum operating temperature	60° C
Detection type	Seismic
Personnel detection, expected range	50 feet
Vehicle detection, expected range	100 feet

Service Commitment

Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.

Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.

Warranty - Show

Telonics warrants its products to be free from defects in material and workmanship for a period of one year from the date acquired. Telonics does not warrant batteries.

If a defect occurs, return the equipment to us within the proper time frame at the following address: TELONICS, 932 E. IMPALA AVENUE, MESA AZ USA 85204-6699. Damage to any equipment resulting from misuse, accidents, unauthorized service, extreme conditions, or other causes, is excluded from this warranty. Telonics does not assume responsibility for loss or damage to equipment during shipment. Telonics does not assume responsibility for delays resulting from shipment on commercial or private carriers. We insure all equipment shipped from our facility and suggest that shipments to Telonics also be insured.

Upon the timely return to our facility, if defective, the product will be replaced or repaired at our discretion at no cost to the customer. This remedy is the exclusive remedy. This product is supplied without any further warranties or conditions, expressed or implied, including warranties of merchantability, quality or fitness for particular reason or those arising by laws, statutes or trade usage or course of dealing.

The entire risk, as to the results and performance of the product, is assumed by the customer. Neither Telonics, nor its suppliers, shall have any liability to the customer or any other person or entity for any indirect, incidental, special, or consequential damage whatsoever, regardless whether Telonics has been told of the possibility of such damages or that such damages might be foreseeable. Telonics has no responsibility or liability for the claims of any third party. The maximum aggregate to the customer, of Telonics and its suppliers, shall not exceed the amount paid by the customer for the product.