TR-5 Telemetry Scanning-Receiver
with Optional Data Acquisition System

The TR-5 Telemetry Scanning-Receiver is designed for use with conventional VHF transmitters and is capable of receiving and processing signals in the 140-230 MHz frequency range. The TR-5 has a standard 4 megahertz frequency range specified. A 6 megahertz version is available as Option 030 (6MHz). TR-5 is designed to receive and process the type of RF signal transmitted by a radio frequency (RF) beacon, i.e. a continuous wave signal with pulse interval (period) modulation consisting of a series of pulses of short duration ( 12 to 255 millisecond duration) separated by a period of time in the range of 0.100 to 9.900 seconds. This transmission format is used in most conventional VHF wildlife transmitting subsystems used for tracking applications. The TR-5 can be operated from its internal battery (8 AA Alkaline pack is standard) or externally powered from either a RP-2 AC power supply or a PS 007248-001 DC power cord attached to any 12 to 18 VDC source (such as a car battery).

Modes of Operation

The TR-5 has four fundamental modes of operation:

• Manual Mode (standard). The receiver is under direct user control during operation. In this mode of operation, the frequency of interest is entered into the receiver using the keypad. Delta tune, gain, and volume are also under direct manual control.
• Scan Mode (standard). As in the Manual Mode, the user has complete control of the receiver's delta tune, gain and volume. In addition, the receiver has the ability to step through multiple frequencies, dwelling for user specified periods on each frequency. The user can enter the frequency information and dwell times directly using the keypad of the TR-5 or the on a PC utility called the TR-5 interface program supplied in the TR-5 KIT. This file can be edited, saved, modified or downloaded to the TR-5. This is the easiest method when entering more than a few frequencies. When transmitters are detected, the user may choose to pause on the current frequency indefinitely by pressing the PAUSE key. When the user is satisfied, scanning can be resumed by pressing any of three different keys. Any frequency may be removed from the scan sequence; however, the actual frequency is not lost from memory and all frequencies in the memory may be restored to the scan sequence. An additional feature has been developed to search for transmitters which are slightly off frequency. Before the scan sequence is initiated by the user, three options are made available: scan only the designated or base frequencies in the scan list or utilize the Expanded Search Mode by searching +/- 1 kHz from the base frequency or +/- 2 kHz from the base frequency. Internal memory on board the TR-5 is capable of storing 255 individual frequencies for scanning. Frequencies can be assigned to groups and a priority scan sequence can be established and modified while the receiver is in use.
• Data Acquisition Mode (Option 320). This TR-5 option can be installed and enabled by the factory either at the time of purchase or at a later time when the user requires this special function. Allows the receiver to scan, detect, acquire, and archive telemetry data while operating in either an attended or unattended mode. Every qualified pulse and associated interval is date and time stamped and stored in the TR-5's data base. The archived telemetry data can be retrieved from the TR-5 using a PC and Telonics' proprietary program. The memory available for data storage consists of 4096 bytes of non-volatile EEPROM and 1 megabyte of static RAM. In the data acquisition mode, this memory is capable of holding 153,000 data records associated with a frequency, pulse period, date and time of acquisition.
• Utilities Mode (standard). In this mode, the researcher can accomplish those tasks that support the other modes but are distinct from them. An example is the transfer of files generated on a PC for support of the Scan or Data Acquisition Modes of operation.

The TR-5PI Parameter Interface is a utility program with several unique features which aid in setting up the TR-5 for operation in the Scan Mode and the Data Acquisition Mode. Although all functions of the TR-5 receiver-scanner can be entered or modified from the integral keypad on the TR-5, the Parameter Interface provides a means of interfacing the TR-5 directly to your PC. This Windows utility allows the researcher to program frequencies to be scanned into the TR-5. Additional information about the transmitters i.e. pulse width and pulse periods used in the data acquisition mode (Option 320) can also be easily entered into the TR-5 through this program. In addition, data collected during the data acquisition can be downloaded using this utility and output to various file formats for later incorporation into a user's GIS.

TR-5 KIT

The TR-5 and related equipment may be purchased individually or as a package. The TR-5 Kit includes the following items:

TR-5 Data Acquisition System

The TR-5 can be configured into a complete data acquisition system. The entire system can be deployed in the field to receive and data log telemetry data on a continuous or scheduled basis. The transmitter frequencies, date, time, pulse period, signal strength are logged into memory for later downloading by the researcher. The system operates in a fully unattended mode for the collection of any pulse coded data such as temperature, heart rate, activity level, mortality or simply presence or absence information. The system collects any data encoded into the pulse period of the transmitter but does not collect bearings or positional data. To function as a data acquisition system the following components are recommended and must be procured separately:

TR-5 Kit
Option 320 Data Acquisition Option
RC-9 Instrument Case
RP-7 Field Power Pack
RP-14-110 110-120 VAC Wall Charger for the RP-7

AND

An appropriate antenna and coax cabling must be procured separately. Most system users select an omni-directional antenna such as the RA-6B, RA-10, or RA-5A (see section on receiving antennas for fixed stations. The appropriate coax cable length and connectors must be selected.

Note: The researcher may substitute power supply options or provide alternative antennas or waterproof enclosures for the equipment listed above. The researcher using this approach must integrate the components. The information provided describes a complete system ready to go to the field without the requirement for the researcher to provide any additional components or complete any integration.

TR-5 shown as part of a Data Acquisition System

Specifications

All specifications are subject to change without notice.

Receiver

General

Power Supply

TR-5 Accessories

Programming Accessories

(no image available)	TR-5PI Parameter Interface Windows based software used to program frequencies and associated transmitter parameters into the TR-5 receiver and recover stored data from a TR-5 with Option 320 (Data Acquisition).
	TPC-1 Programming Cable A Data transfer Cable (DB9 pin male to DB9 pin female) is used in conjunction with the TR-5PI Parameter Interface to transfer parameters and data files between the TR-5 and the user's PC.

Cases

RC-7 Carrying Case Navy Blue, Ballistic Cloth, with Strap.

RC-9 Instrument Case Water-tight, dust proof, lockable case with o-ring seal. Supplied with custom foam interior for placement of a TR-5 receiver and one or optionally two RP-7 12 VDC Power Packs sold separately. Provides a portable weather resistant housing for a TR-5 Data Acquisition System and power packs. Includes internal cabling, adapters, bulkhead BNC connector (with exterior female connection) for attachment of the coax cable or antenna, and an external power input jack. Dimensions: Outside 13 X 12 X 6 inches, Inside 12.25 X 9.25 X 5.25 inches. Weight: 6.0 lbs.

TR-5 Receiver shown with a standard alkaline battery pack (comes with all TR-5 Receivers) and an additional optimal rechargeable battery pack and its charge cord.

Power Supply Options

	PS-009736-001 110-240 VAC Power Cord Provides direct power to the TR-4 or TR-5 Receivers from a 110-240 VAC 50/60 Hz source.
	PS-007248-001 12VDC Power Cord. Used to power TR-5 Receiver from a 12 volt DC, negative ground electrical system (automobile battery). The plug on this cord requires a cigarette lighter on the power source.
	PS-006476-100 Rechargeable Li-Ion Battery Pack A direct replacement for the Alkaline Primary Battery Pack which comes with all TR-5 Receivers. This option provides the user with the most advanced and energy dense rechargeable power system available today. Note that Li-Ion systems do not have the "memory" problems associated with the Nickel-xxx electrochemical systems of the past. This battery pack contains two independent batteries for redundancy and is capable of running the TR-5 unit for 24 hours without the display backlight and 18 hours with the backlight turned on. The recharge time for the system is just 4 hours. This option comes with its own charger, the PS006477-001 AC charge cord and includes two of the PS006478-001 rechargeable Sony Li-Ion batteries. No special tools are required for installation.
	PS-006476-110 Rechargeable Li-Ion Battery Pack Housing As above, but supplied without the PS006478-001 Li-Ion Batteries
	PS-006477-001 AC Charge Cord This special replacement charge cord is used for charging the PS-006476-100 Battery Pack Rechargeable Li-Ion Battery Pack from any 110-120 VAC 50/60 Hz. outlet power source. This heavy-duty cord is designed specifically to charge both Li-Ion batteries while installed in the PS-006476 battery Pack. Please note this is not the same as the PS-009736-001 AC Power Cord used to operate the TR-5 from a 110-240 VAC 50/60 Hertz wall current.
	PS-006478-001 Li-Ion Battery This is a replacement battery (one battery) for the PS-006476 Li-Ion Battery Pack. Two of these batteries are contained in the PS-006476-100.
	PS-006479-001 Li-Ion Battery Charger This charger can be used to charge a single PS-006478-001 battery directly when not installed in the PS-006476-100 or PS006476-110 Rechargeable Battery Packs.
	PS-005893-110 Alkaline Battery Pack Housing This is a replacement housing for the 8AA Alkaline battery pack housing which comes with the TR-5 Receiver. This is the housing only and does not include the 8 Alkaline batteries.
	RP-7 Field Power Pack 12 VDC. 7 Ampere-hour field power source. Sealed lead-acid, high impact case. 90 day warranty. Dimensions: 6.0 X 2.6 X 4.0 inches. Weight: 5.5 lbs. Designed for use in the TR-5 Data Acquisition System (see RC-9 Instrument Case). One RP-7 Power Pack will power the TR-5 for approximately 77 hours with TR-5 current requirement at 90 mA. Current requirement depends on RF/AF gain selected and backlight on versus off. Two RP-7 Power Packs will fit within the RC-9 Instrument Case along with the TR-5. Requires PS-008861-001 charger (purchased separately). International customers may also require additional power outlet adapters and AC Step down Transformer (RP-5).
	PS-008861-001 Charger 110-120 VAC, 12 VDC, 800 mA for charging RP-7 Field Power Pack. Note: For international customers (excluding Canada), adapters are required.
	PS-000527-001 (RP-5) 220/240 VAC to 110/120 VAC voltage converter, 50W maximum.
	ADP-2 12 VDC Outlet Adapter. One cigarette-lighter plug on one end, two cigarette-lighter jacks on other.

Audio Accessories

	RH-2 Headphones High quality, noise canceling, low impedance headphones designed for heavy use. Supplied with a straight cord, 0.25" plug, and foam filled ear seals. These headphones replace the RH-1 headphones.
	RW-4A "Y" Adapter Allows the use of two low-impedance headsets with a single receiver.

Audio Enhancement Accessories

	TNR-3000 Telonics TNR-3000 Noise Reduction Unit is small, rugged, and lightweight; and is suitable for operation in vehicles or at fixed sites. Users can power the TNR-3000 with either an internal 9 volt battery, a car power jack, or an AC power source, depending on application requirements. Telonics supplies the appropriate cables and transformers separately.

Manual

• TR-5 User's Manual

Service Commitment

Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.

Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.

Warranty - Show